The ZyXEL Keenetic Giga router has 300mbps WiFi, 4 Gigabit ETH-ports and 0 USB-ports.
It is also known as the ZyXEL Интернет-центр для подключения по выделенной линии Ethernet, с точкой доступа Wi-Fi 802.11n 300 Мбит/с, коммутатором Gigabit Ethernet и многофункциональным 2-портовым хостом USB.
ZyXEL Keenetic Giga default Password , Login & Gateway settings :
Default Gateway IP: 192.168.1.1
ZyXEL login instructions
Default username: admin
ZyXEL router default password list
Default password: 1234
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
How to factory reset (hard reset) ZyXEL Keenetic Giga :
You can factory reset your ZyXEL Keenetic Giga in the following way(s)
Through the web interface
Open web browser and go to the address of your router (check defaults below)
Log in with your username/password (default are below)
Under Maintenance, locate Backup/Restore and click it
Locate the section Factory defaults and click the reset button, if prompted click Ok
Wait for the router to reboot
With the reset button
Have the router plugged in and turned on
Locate the reset button which is marked reset and usually in a hole
With a paperclip or sharp pen, press and hold the reset button for 10 seconds until the SYS light starts to blink
If the SYS light doesn’t start to blink after 10 seconds
Keep holding the reset button pressed
Turn off the modem / unplug it
While still holding the reset button, start / plug in the router
After about 20 seconds, the Power or SYS light will start blinking rapidly
Release the reset button
When the light stops blinking and light up normally the router is reset.
How to login to the ZyXEL Keenetic Giga :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and the password 1234
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
ZyXEL Keenetic Giga router specifications :
CPU: 384 MHz
RAM: 64 MiB
Flash: 8 MiB
Custom firmwares: None
WiFi: 300mbps (bgn)
WiFi throughput: n/a
1 x Gigabit port
4 x Gigabit ports
Keenetic Giga Firmwares
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the ZyXEL Keenetic Giga
ZyXEL stock firmware for the Keenetic Giga
Stock firmwares for the Keenetic Giga are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.