The Linksys LAPAC1200 router has Gigabit WiFi, 1 Gigabit ETH-ports and 0 USB-ports.
Linksys LAPAC1200 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.1.252
Linksys login instructions
Default username: admin
Linksys router default password list
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.252
How to factory reset (hard reset) Linksys LAPAC1200 :
You can factory reset your Linksys LAPAC1200 in the following way(s)
Through the web interface
Open your browser and navigate to the router interface (see default settings below)
Under the Administration tab you will find a sub-tab called Factory defaults
On the Factory defaults page click the button labeled Restore Factory Defaults
With the reset button
Have your unit powered on
Press and hold the reset button for at least 10 seconds until the power light starts blinking, then release.
When the power light goes solid, unplug the power to the router for 10 seconds
Plug the power back in and start the router
When the power light goes solid again the router is ready to use.
How to login to the Linksys LAPAC1200 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
Linksys LAPAC1200 router specifications :
RAM: 128 MiB
Flash: 16 MiB
Custom firmwares: None
WiFi: Gigabit (abgn+ac)
2.4GHz & 5GHz
WiFi throughput: n/a
1 x Gigabit port
Linksys LAPAC1200 review (quick overview)
Here is the quick comparison of how the Linksys LAPAC1200 compares to
other routers on our site
For a full list of routers and how they compare to the LAPAC1200, check the
Router Buying Guide which will help you buy the most
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the Linksys LAPAC1200
Linksys stock firmware for the LAPAC1200
Stock firmwares for the LAPAC1200 are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.