The ASUS RT-AC3200 router has Gigabit WiFi, 4 N/A ETH-ports and 0 USB-ports. It has a total combined WiFi throughput of 3200 Mpbs.
It is also known as the ASUS Wireless-AC3200 Tri-Band Gigabit Router. It also supports custom firmwares like: dd-wrt
ASUS RT-AC3200 default Password , Login & Gateway settings :
Default Gateway IP: 192.168.1.1
Default username: admin
Default password: admin
Default subnet mask: 255.255.255.0
Default DNS server: 192.168.1.1
How to factory reset (hard reset) ASUS RT-AC3200 :
You can factory reset your ASUS RT-AC3200 in the following way(s)
Through the web-interface
Open your browser and navigate to the default gateway ip (see default settings below)
Sign in to the web-interface with the username and password you have selected, or try the defaulr username and password (see default settings below)
Under the advanced settings menu, select administration
Find the link ” Restore/Save/Upload Setting
Beside Factory default click on Restore
If prompted, click ok
With the reset button on the router
Locate the reset button on the backside of your unit
with a sharp object, e.g. a paperclip or pencil, press and hold the reset button for 5s or until the power led starts flashing
How to login to the ASUS RT-AC3200 :
Make sure you are connected to the router’s network, either by Wi-Fi or ethernet cable.
Open your browser and visit
You should be prompted with a login dialogue.
Enter the username: admin
and the password admin
You will now be logged in. If you haven’t yet changed the defaul password, we recommend that you change it first
thing you do after logging in.
ASUS RT-AC3200 router specifications :
CPU: 1 GHz
RAM: 256 MiB
Flash: 128 MiB
Custom firmwares: dd-wrt
WiFi: Gigabit (abgn+ac)
2.4GHz & 5GHz
WiFi throughput: 3200 Mpbs
1 x N/A port
4 x N/A ports
Staying up to date with the latest firmware is a good idea to keep your router even more
from various security flaws.
If you want to squeeze a little bit of extra functionality out of your router, consider
an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly
the stability and functionality of your old router.
Following are the firmwares that we have identified existing for the ASUS RT-AC3200
Flashing dd-wrt on the ASUS RT-AC3200
Since the RT-AC3200 has 128 MiB of flash memory, you should be able to
dd-wrt with full functionality without having to worry too much about which firmware
We haven’t find any specific instructions for flashin dd-wrt onto the ASUS
RT-AC3200, but you can read the
Installation guide over at dd-wrt to get a clue on how to proceed (As this model is listed as
Note: Always make sure to read the wiki and howtos of dd-wrt before doing any
ASUS stock firmware for the RT-AC3200
Stock firmwares for the RT-AC3200 are available under the download section on the
support page. You can also refer
to the router’s manual for instructions on how to upgrade the firmware.